coupling starter & screw on unit/bucking machine
The Auto pre-tightening unit is consisted of coupling arranging rollers for greasing, greasing device, ect
- Model： YJ340
- Application：
- Max.pre-tightening torque：
- Max.screwing torque：
Equipment composition and description
自動預擰機包括接箍涂油排料滾道、接箍涂油機、預緊機主機、擰扣機、步進機、管端通徑機、液壓系統、和控制系統等。
The Auto pre-tightening unit is consisted of coupling arranging rollers for greasing, greasing device, pre-tightening machine, bucking machine, stepping machine, pipe ends drifting machine, hydraulic system, and control system, etc.
1. 接箍涂油排料滾道：設有接箍存放排料滾道、涂油工位、送料工位、接箍長度測量功能及送料機構。
Coupling arranging raceway for greasing: includes saving &arranging raceway. Greasing station, feeding station, coupling measuring and feeding device.
2. 接箍涂油機：主要由機架、傳動箱總成（含氣動馬達、涂油桿、氣閥等），推進氣缸、油脂泵等組成。
Coupling greasing device:it is consisted of frame, transmission box assembly(pneumatic motor, greasing rod, air valve, etc), pushing cylinder,and grease pump, etc.
3. 預緊機主機：由液壓卡盤總成（卡盤總成包括主軸、傳動齒輪、驅動馬達組件、定位油缸組件、定位盤、夾緊油缸組件、彈性托輥組件）推進油缸、接箍取料機構、浮動機構、機架等組成。
Pre-tightening machine: is is consisted of hydraulic chuck assembly(includes spindle, transmission gear, driving motor assembly, positioning cylinder assembly, positioning disc, clamping cylinder assembly, elastic roller assembly)pushing cylinder, tacking mechanism, floating mechanism, and frame.
4.擰接機(Bucking machine)
采用型號為擰扣機：型號YNJG400，當完成預緊的油套管放到擰扣機工位后，開始擰扣，編碼器記錄擰緊深度，PLC將接箍長度，預緊深度，擰扣深度比較計算后得出J值；
Bucking machine model:YNJG400, put the pipe onto the bucking machine after pre-tightened, starts to make up the pipe, the encoder records the depth and PLC analyse and calculate the coupling length, pre-tightening depth and making-up depth to obtain the J value.
1. 預擰及擰接范圍(Application)： Ф114～Ф340（41/2″、51/2″、65/8″、7″、8″、 95/8″″、103/4″、133/8″）
2. 鋼管長度(Applicable Length)：9-12.5米
3. 鋼管最大單重(Unit weight of pipe)：1700KG
4. 適用扣型：API 圓螺紋，偏梯螺紋及各種有肩或無肩特殊扣型
Applicable connections: API (round & BTC)and Premium connections(with or without shoulder)
5. 適用鋼級：Group 1 –Group4
Applicable steel grade:Group 1 –Group4
6. 最大預擰扭矩 (Max.pre-tightening torque)：500N .M
7. 最大擰接扭矩：80KN.M（最大壓力達到20Mpa時）
Max.screwing torque:80KN.M @ 20Mpa pressure.
8. 牙痕要求：管體及接箍表面達到API要求；
Die marking: according to API standard.
9. 自動測量J值公差精度：±0.5mm
J value tolerance: ±0.5mm
10. 擰接后接箍橢圓度：≤0.075-0.15%
Ovality of coupling after screwing:≤0.075-0.15%
11. 預擰機接箍自動涂油：根據接箍尺寸大小可調整涂油量
Auto-greasing into the coupling:can be adjusted to the coupling size.
12. 生產節拍：50-80根/小時
Working speed:50-80connections/hour
13. 控制方式： 手動、半自動、自動控制三種模式
Control method:manual,semi/full-Auto modes.
14. 擰接記錄及報表(Screwing record & reports)：
14.1 能擰接API標準扣型及有肩和無肩特殊扣型，可顯示扭矩/圈數變化曲線，圈數和扭矩值自動記錄，自動對特殊扣拐點扭矩進行檢測、分析，以及根據J值自動判定合格與不合格品，同時形成鋼管接箍擰接曲線并保存
The unit can be used for API and Premium connections(with or without shoulder), it can display the torque-turns graph, and record the torque & turns automatically, detect & analyze the inflection point of premium connection, judge the connection is qualified or not according to the J value and save the screwing graph.
14.2 擰接工位的擰接數據可形成班、日、月產量和質量報表
The screwing data can be saved as forms of daily, monthly production and quality reports
15. 自動控制及通訊要求
Auto-control & communication requirements
采用西門子PLC控制系統，LABVIEW軟件做人機界面，通過以太網與上位機連接，并與總控室進行通訊，在總控室即能觀察到設備運行狀態，同時具有遠程對話及故障診斷功能。
Siemens PLC as control system. LABVIEW human-computer interface, connect to upper PC with Ethernet and communication with the control room.So it can realize the observation, remote dialogue and fault diagnosis in the control room.